Silvercrest STMS 2017 A1, User Manual

Page: 14 / 116

English Wireless keyboard with wireless mouse STMS 2017 A1
12
Connecting the USB Nano Receiver
If you still have your old keyboard and mouse connected to the computer, please
shut down your computer, disconnect the corresponding devices from the PC and
restart the computer.
Remove the USB nano receiver from its storage
compartment (see the chapter “Inserting the
Batteries”).
Plug the USB nano receiver into a free USB port on
your powered-on computer.
Fig.: Miniature USB Receiver
The operating system will automatically recognize the new hardware and install
the required drivers. Depending on the operating system installed, the following
screen messages may appear:
Windows
®
XP
When the receiver is connected for the first time, the operating system
Windows
®
2000/XP displays the message „New hardware detected“. Wait until
the message „The new hardware has been installed and is now ready for use“ is
displayed before using your mouse and keyboard.
Windows Vista
®
, Windows
®
7
When the receiver is connected for the first time, the operating system Windows
Vista
®
displays the message „Installation of appliance driver software“. Wait until
the message „The appliances are ready for use now“ appears. The mouse and
keyboard are now operational and ready to be used.
If the connection to the nano receiver is interrupted or if it is not
possible to establish a connection, remove the batteries from
the mouse and keyboard and re-insert them.