- 23 -
Defrosting by time
Note:
Always place the food to be defrosted on dishes
suitable for use in a microwave oven. Never place
it directly on the turntable
3
!
1.
When in standby mode, turn the rotary knob
r
anticlockwise until
1
"A-12" and
appear in the display.
2.
Press the Start/quick start button
r
.
3.
Now set the required time using the rotary
knob
r
.
4.
Press the Start/quick start button
r
to
start the defrosting process. The countdown
begins.
Note:
To ensure optimum defrosting, it is necessary to
turn the food during the defrosting process. The ap-
pliance will remind you to turn the food over by
sounding a signal tone and showing "turn" in the
display
1
. Open the appliance door, turn the
food and then reclose the door. Press the Start/
quick start button
r
to continue the defro-
sting process.
If you do not want to turn the food, just wait for
the signal tones to stop. The appliance will automati-
cally continue the defrosting process. We recom-
mend that you do turn the food. This will ensure
an even defrosting.
Recipes
Meat patty
•
Use around 125 g of minced beef to form
each patty (diameter approx. 75 mm, height
approx. 35mm).
•
Distribute the patties evenly around the
turntable
3
.
Preparation
You will achieve the best results if you alternate
between the convection and microwave functions.
Always wait until the set cooking process has com-
pleted before setting the next process.
1.
Convection 200°C, 4:00 min.
2.
Microwave 900 W power, 5:30 min.
3.
Convection 200°C, 2:00 min.
(depending on personal taste, a time of up to
4:00 min can also be used).
Baking frozen ready-made bread rolls
• Select the convection function to bake bread
rolls.
• Place 3-4 bread rolls on the turntable
3
.
Pre-heating of the microwave is not required.
Select the following settings for the baking process:
• Convection 170°C, duration: 12 minutes
If you wish to bake additional rolls directly after-
wards, shorten the baking time for these by about
1-2 minutes, as the appliance is now already pre-
heated.
Summary of Contents for SMW 900 EDS B3
Page 3: ...A B C ...
