Silvercrest SDG 800 B2, Operating Instructions Manual

Page: 21 / 146

19
GB
12. Problem-solving
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER of electric shock!
Do not attempt to repair the device
yourself under any circumstances.
13. Technical
specifications
Subject to technical modification.
14. Warranty of the
HOYER Handel GmbH
Dear Customer,
your device is provided with a 3 year war-
ranty starting with the purchase date. In the
event of product defects, you are entitled to
statutory rights against the vendor. These
statutory rights are not restricted by our war-
ranty presented in the following.
Warranty conditions
The warranty period starts with the purchase
date. Please keep the original purchase re-
ceipt in a safe place. This document is re-
quired to verify the purchase.
If within three years from the purchase date
of this product a material or factory defect
occurs, the product will be repaired or re-
placed by us – at our discretion – free of
charge to you. This warranty implies that
within the period of three years the defective
device and the purchase receipt are present-
ed, including a brief written description of
the defect and the time it occurred.
If the defect is covered by our warranty, the
repaired or a new product will be returned
to you. No new warranty period starts with
a repair or replacement of the product.
Warranty period and statutory
claims for defects
The warranty period is not extended when
the warranty has been claimed. This also ap-
plies to replaced and repaired parts. Any
damages and defects already existing at the
time of purchase must be reported immedi-
ately upon unpacking. Repairs arising after
the expiration of the warranty period are
subject to a charge.
Warranty coverage
The device was produced carefully according
to strict quality guidelines and tested diligent-
ly prior to delivery.
Fault
Possible causes /
Action
No function
• Has the device been con-
nected to the power sup-
ply?
• Check the connection.
• Has the thermal cut-out
switched off the device?
(see “Thermal cut-out” on
page 10)
Model: SDG 800 B2
Mains voltage: 230 V ~ 50 Hz
Protection class: I
Power rating:
800 W
BB&3(B%ERRN6HLWH'RQQHUVWDJ$XJXVW