![Silvercrest MONSIEUR CUISINE SKMH 1100 A1 Operating Instructions Manual Download Page 22](http://html.mh-extra.com/html/silvercrest/monsieur-cuisine-skmh-1100-a1/monsieur-cuisine-skmh-1100-a1_operating-instructions-manual_386965022.webp)
20
Note:
The seal for the drip tray
5
must
be mounted in such a way that the label
“BACK” is no longer visible.
8. Replace the seal
24
in the lid of the
blender jug
25
.
Note:
The seal
24
in the lid of the
blender jug must be positioned so that
the smooth side is inwards.
9. Replace the seal
19
in the blade
assembly
20
.
10.4 Cleaning in the dishwasher
The following parts are suitable for cleaning
in a dishwasher:
— blender jug
6
— lid for blender jug’s fill opening with
measuring scale
26
— lid for blender jug
25
without its seal
24
— blade assembly
20
without its seal
19
— cooking pot
21
— mixer attachment
22
— spatula
23
— drip tray
4
without its seal
5
— steamer basket, deep
3
— steamer basket, shallow
2
— lids for steamer baskets
1
Under no circumstances
may any of
the following parts be cleaned in the
dishwasher:
• base unit
17
• seals
10.5 Descaling
If you steam with very hard water,
especially, the parts used, particularly those
in the blender jug
6
, can become covered in
limescale.
1. Remove mild limescale deposits by
wiping them off with a little household
vinegar on a cloth.
2. Rinse off with clean water.
If significant deposits of limescale have
already accumulated, remove these urgently
to ensure the appliance works properly.
Limescale can impair performance
considerably.
Caution!
Do not use commercial descaling
products, pure acetic acid or vinegar
essence.
3. To get rid of significant limescale, we
recommend putting 500 ml white table
vinegar and 500 ml boiling water in a
suitable container, such as a plastic
bowl, and to leave this to act on the
parts covered in limescale for 30 min.
Note:
longer soaking times will not
improve descaling, but may permanently
damage the parts.
4. Rinse off with clean water.
5. Allow parts to dry completely before
using them again.
10.6 Ordering seals
Seals for the lid of the blender jug
24
, the
blade assembly
19
and the drip tray
5
can
be ordered from our Service Centre (see
“ Service Centre” on page 24).
RP114279 Küchenmaschine mit Heizung LB4 Seite 20 Mittwoch, 18. Februar 2015 2:47 14