manualshive.com logo in svg

Silvercrest KH 2450, Operating Instructions Manual, Page: 56 / 74

Share
Download
Silvercrest KH 2450 Operating Instructions Manual Download Page 56

58

9. maintenance

9.1 Changing the batteries/cells

If the inserted batteries resp. cells are discharged, the battery symbol blinks in the 

display 

q

. An audio warning sounds, in the display 

q

 »Low battery - Shutting 

down« is indicated. Subsequently, the voice recorder then switches itself off.

‹

]

 noTICe:

 

›

Should this happen during a working dictation recording, cease it immediately. Otherwise, the dictation  

recording could be wholly or partly lost.

Change standard (non-rechargeable) batteries for new ones of the type AA/LR06/

Mignon 1.5 V. Exchange drained cells for charged ones of the type AA/Mignon 1.2 V. 

Cells can also be charged in the battery compartment of the voice recorder; further  

information available in chapter 9.2 » Recharging cells in the battery compartment 

of the voice recorder.«
Alternatively, you can also adapt the voice recorder for mains power operation.

9.2 Recharging cells in the battery compartment of the voice recorder

Cells can be recharged in the battery compartment of the voice recorder when they 

are discharged. For this, the voice recorder must …

Ú

  be connected to a mains power socket via a suitable power adaptor  

(not supplied), or

Ú

  be connected to a PC via the supplied USB cable.

‹

†

 Danger!

 

›

Never attempt to recharge standard batteries in the battery compartment of the voice recorder!  

Essentially, only cells can be recharged. Otherwise, there is a risk of explosions or fire!  

Additionally, the voice recorder could become irreparably damaged.
When operating the voice recorder on mains power use only a suitable and undamaged power adapter; 

Output voltage: 5 V DC, Output current: 500 mA, DC-Plug (Barrel plug) 1,0/3,0 mm (Inner/Outer diameter), 

Polarity DC-Plug: 

. Suitable power adapters are available in electronic and audio/video specialist 

shops. Should the voice recorder be used with an unsuitable or damaged power adapter, there is the risk of 

you receiving an electric shock! Additionally, the voice recorder could be irreparably damaged!

Bedienungsanleitung KH 2450 EN.indd   58

23.12.2008   23:09:46

Summary of Contents for KH 2450











































































Reviews:

No comments