- 63 -
No sound
The volume is set to minimum.
• Increase the volume.
The MUTE function is activated.
• Press the
MUTE
button to switch the sound back
on.
The cables are not connected correctly.
• Check the cable connections.
Function buttons are not functioning
There is a malfunction with the device.
• Press the RESET button.
The face plate is not correctly installed.
• Check to see that the face plate is installed
correctly.
The CD jumps
The mounting angle exceeds 30°.
• Correct the mounting angle.
The CD is very dirty or defective.
• Clean the CD or insert a different CD.
Failure with burnt CDs
Check the burnt CD in another playback device.
The radio and/or the automatic station
memory is not functioning
The antenna cable is not connected correctly.
• Check the antenna cable for correct connection.
The station signals are too weak.
• Set the station manually.
Station memory is not functioning
The connection 7 in the ISO block A (Permanent
positive) is not connected correctly.
• Check the cable connections.
For this consult the chapter "Connections".
The device's USB port does not function
The USB port is intended for devices that function
according to the USB standard. Not all market available
devices conform to this standard. It is possible that
a device is connected that does not function according
to the USB standard.
• Connect a device that functions according to the
USB standard.
The card reading device does not read the
cards
The card is possibly defective, dirty or not properly
inserted.
• Check the card. Slide it in with the inscribed side
facing to the right.
Cleaning
•
Clean the housing and the face plate only with
a slightly damp cloth and a mild cleanser. Ensure
that moisture cannot permeate into the device
during cleaning!
Warning!
Moisture penetrating into the device creates
the risk of electric shock! Besides which, the
device could become irreparably damaged!
IB_KH2381_41164_LB5 14.11.2008 9:19 Uhr Seite 63