Silvercrest CRB-531 Instructions Manual Download Page 9 | Manualshive

Page: 9 / 54

background image

9

Note:

We recommend that you have the device installed by a specialized company. Then you will have created the prerequisites for
a problem-free functioning of the device. If at any point during the installation you are unsure that you can correctly connect

the device by yourself, contact a specialist. A faulty installation may cause damages to the device and the vehicle electronics.

1. For the installation of the device, please remove the transport safety screws on the CD drive first.
2. Then remove the installation frame from the device with the aid of the disassembly key, by sliding the disassembly keys into

the provided openings on the right and left side of the device, as described in Illustr. 8.1. Make sure that the protrusion on

the disassembly key (Illustr. 8.2) points away from the device while it is being inserted. Afterwards, the frame can be slid
down over the device towards the rear.

3. Now slide the installation frame into the installation slot provided for the car radio.
4. Now attach the installation frame by bending the installation brackets towards the outside with a screwdriver. The frame is

properly installed when it can no longer be pulled out, yet also keeps from sliding into the installation slot.

5. Now connect the cable set and the antenna corresponding to the Illustr. 8.3 and Illustr. 8.4 as well as the table below to the

vehicle’s electric system. Also observe the specifications in sections 8.2 to 8.4.

Connector pin assignment ISO connector plug (also see Illustr. 8.3 number 7)

Contact

Plug A

Plug B

1

Rear right (+) – violet

2

Rear right (-) - violet / black

3

Front right (+) - grey

4

Ignition (ACC+) / red

Front right (-) – grey / black

5

Car antenna / blue

Front left (+) - white

6

Automatic operating unit dimmer / orange

Front left (-) – white / black

7

Battery 12V (+) / yellow

Rear left (+) - green

8

Ground / black

Rear left (-) – green / black

6. Slide the device into the installation frame until the stop. The device will then audibly lock into place.
7. Attach the front frame and then insert the operating unit.

«
...
7
8
9
10
11
...
»

Summary of Contents for CRB-531























































Reviews:

No comments

Related manuals for CRB-531

Brand: Danfoss Pages: 16

Brand: Panasonic Pages: 24

Brand: Pyle Pages: 39

Brand: Aiwa Pages: 21

Brand: chinavasion Pages: 45

Brand: AMG Systems Pages: 8

Brand: azur Pages: 98

Brand: Magnetek Pages: 25

Brand: Denon Pages: 2

Brand: Caliber Pages: 29

Brand: COP Security Pages: 2

Brand: JVC KENWOOD Pages: 48

Brand: Boss Audio Systems Pages: 35

Brand: Sirius Satellite Radio Pages: 12

Brand: Denon Pages: 128

Brand: Kenwood Pages: 6

CQVD7001U - CAR A/V DVD NAV

Brand: Panasonic Pages: 74

Brand: Crosley Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands