39
Note:
During a telephone conversation, it’s possible to adjust the volume to the current requirements at any time through the control
dial .
“DSP”: Sound settings – 4-band equalizer
In the “DSP” menu, you have the option of selecting between four different sound settings. The choices are between the sound
settings “CLASSIC“, ”ROCK“, ”POP“ and ”FLAT“. Here you also have the option of deactivating the “DSP” function (“DSP
NONE”).
To select between the different sound settings, press the control dial until menu level 2 is reached. The “INVOL” function will
appear. Press the control dial repeatedly until you get to the menu item “DSP”. There you will have the option of selecting
between the different sound settings by turning the dial.
The setting is saved either when the desired value is confirmed by pressing the control dial or through automatic storage
(don’t change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial , you
will reach the next possible setting. If you use the automatic storage, the device will return to the standard display.
Note:
After selecting the sound setting, it will appear on the display of the device together with the message “DSP”.
“LOUD”: Sound setting – Loudness
The “LOUD” function makes it possible to emphasize low and high frequencies through the push of a button in order to increase
sound perception in an adjustment to the respective volume.
To activate the “LOUD” function, press the control dial until menu level 2 is reached. The “INVOL” function will appear. Press
the control dial repeatedly until you get to the menu item “LOUDNESS”. There you will have the option of activating (“LOUD
ON”) or deactivating (“LOUD OFF”) the function by turning the dial.
The setting is saved either when the desired value is confirmed by pressing the control dial or through automatic storage
(don’t change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial , you
will reach the next possible setting. If you use the automatic storage, the device will return to the standard display.
Note:
When the “LOUDNESS” function (“LOUD ON”) is activated, the message “LOUD” appears on the display. This is turned off
after deactivation.
