Silvercrest 75466, Operating Instructions Manual

Page: 47 / 173

- 45 -
• Press the unlocking button
f
and bring the swivel
arm
h
into operating position 4 (see chapter
„Operating positions“) (Fig. ).
• Insert the mixing bowl
y
. The base of the mixing
bowl
y
must engage in the recesses
k
on the
appliance.
• Press the unlocking button
f
and bring the swivel
arm
h
into operating position 1 (Fig. ).
• Place and hold turn-switch
g
in position P, until
the drive motor
j
remains stationary in the park
position (Fig. ). Should the drive motor not
move it is already at the park position.
• Press the unlocking button
f
and bring the swivel
arm
h
into operating position 4 (Fig. ).
• Depending on the task to be performed, insert
the kneading hooks
q
, beaters
w
or whisks
e
so that they firmly engage in the drive
j
motor.
Note:
The kneading hooks
q
are fitted with a
pastry deflector. Turn the pastry deflector until
the kneading hooks
q
can engage (Fig. ).
• Place the ingredients to be processed into the
mixing bowl
y
.
Note:
Pay heed that during the kneading
and/or mixing process the pastry in the mixing
bowl increases in volume, or is pressed upwards
through the rotary movement. Take note of the
table in the chapter „Recommended filling
quantities“.
• Press the unlocking button
f
down and bring the
swivel arm
h
to just before operating position 1
(see chapter "Operating positions") (Fig. ),
but do not allow it to engage.
• Slide the lid onto the mixing bowl
y
.
• Move the swivel arm
h
the final distance to
operating position 1 and let it engage, so that
the lid is firmly seated.
• Set the rotary switch
g
to the desired level.
Risk of injury from rotating parts!
NEVER reach into the mixing bowl
y
when it is in use.
Only change accessories when the drive motor
j
is at standstill! After being switched off, the drive motor
j
continues to run for a short time. The appliance
may only be used when the drive openings not
being utilised are covered with drive protection lids.
In cases of malfunction switch the appliance off and
remove the plug from the wall socket, this will avoid
an unintentional switching-on of the appliance.
Refilling with ingredients
• Turn the appliance off with the rotary switch
g
.
• Turn the rotary switch
g
to P and hold it firmly
until the drive motor
j
comes to a standstill
(Fig. ).
• Press the unlocking button
f
down and raise
the swivel arm
h
a little.
• Remove the lid.
• Press the unlocking button
f
down and bring
the swivel arm
h
into operating position 5.
• Fill with ingredients.
On task completion
• Turn the appliance off with the rotary switch
g
.
• Turn the rotary switch
g
to P and hold it firmly
until the drive motor
j
comes to a standstill
(Fig. ).
• Press the unlocking button
f
down and raise
the swivel arm
h
a little.
• Remove the lid.
• Press the unlocking button
f
down and bring
the swivel arm
h
into operating position 4.
• Remove the accessories from the drive motor
j
.
• Remove the mixing bowl
y
.
• Clean all parts (see chapter "Cleaning and care").