Silvercrest 353468 2007, Operating Instructions Manual

Page: 12 / 228

GB
│
IE
│ 9 ■ SEM 1100 C3
Temperature display
The temperature indicator
2
indicates how far the appliance has heated up.
As soon as you switch the appliance on, it starts heating up until the pointer is
approximately in the middle between 80°C and “
”. The red operating lamp
z
lights up. The “Espresso” control lamp
t
flashes green.
Once the pointer reaches the red portion of the scale, the temperature is high enough
to prepare an espresso. The “Espresso” control lamp
t
lights up permanently.
When you press the “Steam” button
4
, the “Steam” control lamp
5
flashes
green. The appliance continues to heat up and the pointer rises higher until it
reaches the range of the scale between “
” and “ ”.
Once the pointer reaches the range between “ ” and “ ” the temperature is
high enough to produce steam. The “Steam” control lamp
5
lights up permanently.
First use
1) Pull out the water tank
9
and remove the orange transport lock
from the water outlet.
2) Clean the sieve holder
i
, the measuring spoon
a
, the espresso sieve
o p
,
the drip grille
q
and the water tank
9
as described in the section “Cleaning
and Care”.
3) Place the appliance on a level and heat-resistant surface. Ensure that a mains
power socket is in the vicinity.
4) Insert the drip grille
q
so that the red float
e
can protrude through the hole
in the drip grille
q
.
IB_353468_SEM1100C3_LB8.indb 9 22.12.2020 08:57:01