Silvercrest 338023 2007, Operating Instructions Manual

Page: 36 / 143

34 GB
9.4 Metal filter
The metal filter 10 is
firmly attached to the fil-
ter carrier
12 . The filter
carrier can easily be
pulled out using the met-
al bracket.
• When assembling, place the filter carri-
er 12 into the dust container 8 straight
on. Ensure that it sits completely straight
in the dust container.
9.5 Motor protection filter
On top of the paper fil-
ter
13 sits the motor
protection filter 15 .
• Remove the dust con-
tainer 8 from the suc-
tion device 2 .
You can then remove
the motor protection
filter
15 from on top
of the paper filter 13 .
9.6 Exhaust air filter
There are two small exhaust air filters 18 at
the top of the suction device 2 .
1. To remove, pull on the unlocking mecha-
nism 20 on the filter cover 19 and lift it
off.
2. On the underside of the filter cover 19 ,
you will find the two exhaust air fil-
ters
18 . Remove them.
3. Insert the new exhaust air filters 18 .
4. Reinsert the filter cover 19 , pull on the
unlocking mechanism 20 and close the
filter cover 19 completely. Then release
the unlocking mechanism 20 .
10
12
13
15
18
20
19
__338023_Handstaubsauger_B8.book Seite 34 Mittwoch, 15. Juli 2020 10:25 10