Silvercrest 338023 2007, Operating Instructions Manual

Page: 35 / 143

33
GB
9. Dust container and
filters
CAUTION:
~
During vacuuming, all filters and the
dust container
8 must be assembled at
all times.
Every operation requires the dust contain-
er
8 and all filters to be inserted:
- the metal filter 10 inside the dust
container 8 ,
- the paper filter 13 inside the filter carri-
er 12 ,
- the motor protection filter 15 on the pa-
per filter 13 ,
- the exhaust air filter 18 at the top of the
suction device 2 .
9.1 Assembling the dust
container
• Place the dust con-
tainer 8 onto the suc-
tion device 2 in such
a way that the arrow
above the open pad-
lock symbol points to
the
z
9 marking.
• Turn the dust contain-
er 8 clockwise until it
clicks into place.
Now the arrow
above the closed
padlock symbol
points to the
z
9
marking.
• To remove, turn the dust container 8 an-
ticlockwise and then pull it off down-
wards.
9.2 Emptying the dust
container
• To empty the dust
container 8 , you do
not need to remove it
from the suction de-
vice
2 .
• Hold the suction de-
vice above a waste
container and then
press the button
14
to open the flap 11
at the bottom of the
dust container
8 .
• To lock the flap 11 , close it again until it
audibly clicks into place.
9.3 Paper filter (HEPA)
The paper filter 13 sits inside the filter carri-
er 12 .
• Remove the paper filter 13 by pulling it
out upwards using the small handle in
the middle.
• To insert, place the
paper filter 13 into
the filter carrier 12
from above.
8
9
14
11
13
12
__338023_Handstaubsauger_B8.book Seite 33 Mittwoch, 15. Juli 2020 10:25 10