Silvercrest 338023 2007, Operating Instructions Manual

Page: 34 / 143

32 GB
8. Vacuum cleaning
CAUTION:
~
During vacuuming, all filters and the
dust container
8 must be assembled at
all times.
1. Assemble the accessories needed.
2. Insert the battery
29 into the battery
compartment 7 .
3. Press the on/off switch 1 to switch
the device on.
- If you want to reduce the suction pow-
er, press the ECO 22 button once.
The LED under the button will be lit
green. To switch off the function, press
the button again.
4. When the dust container 8 is full to the
marking MAX , stop vacuuming and
empty the dust container 8 .
5. To switch off the suction device 2 , press
the on/off switch 1 again.
6. Empty the dust container 8 and hang up
the parts back in the base station 26 .
NOTES:
• After switching on, it takes 1 - 2 seconds
before the device can be switched off
again.
• When using the floorhead 35 , the LEDs
of the LED bar 39 are automatically
switched on. This allows you to see the
area to be vacuumed at all times, even
in dark corners.
• After switching on, it takes 1 - 2 seconds
before the device can be switched to the
mode with reduced suction power using the
ECO 22 button.
• If the rotating brush 37 / hard floor roll-
er 40 is blocked, the vacuum cleaner
switches off. The LEDs 21 / 28 / 39
flash for approx. 7 seconds. Only then
can the vacuum cleaner be switched on
again.
Using the accessories
In the following table, you will find an over-
view of the cleaning tasks for which the var-
ious accessories are particularly suitable.
No. Nozzle Use
35
+ 37
Floorhead
with rotating
brush Versatile use for
cleaning floors
35
+ 40
Floorhead
with hard floor
roller For cleaning hard
floors (e.g. tiles,
laminate)
43
Brush nozzle Sofas, armchairs,
mattresses, furni-
ture, textiles, book
shelves
44
Crevice noz-
zle Cabinets, crevices,
corners, gaps
__338023_Handstaubsauger_B8.book Seite 32 Mittwoch, 15. Juli 2020 10:25 10