Silvercrest 338023 2007, Operating Instructions Manual

Page: 33 / 143

31
GB
7.3 Changing the roller in
the floorhead
You can replace the rotating brush 37 in-
side the floorhead 35 with the hard floor
roller 40 .
1. Turn the floorhead 35 upside down.
2. Pull the small button outwards towards
the open lock symbol and remove the
small cover.
3. Remove the rotating brush 37 from the
floorhead 35 .
4. Instead of the rotating brush 37 , insert
the hard floor roller 40 into the floor-
head 35 .
5. Replace the small cover. Pull the small
button outwards towards the open lock
symbol while closing the small cover.
6. Let go of the small button again. It
points to the closed lock symbol.
7. You can swap the rotating brush 37
and the hard floor roller 40 back again
in the same manner.
7.4 Prior to every use
Prior to every use, the following parts must
be assembled:
Filter unit
The filter unit consists of:
the motor protection fil-
ter
15 , the paper fil-
ter 13 and the filter
carrier 12 with the met-
al filter 10 .
• Always insert the
complete filter unit
into the dust contain-
er
8 .
Dust container
Only use the dust con-
tainer
8 with the com-
plete filter unit.
• Place the dust con-
tainer 8 onto the suc-
tion device 2
(see “Assembling the
dust container” on
page 33) from be-
low.
Battery
The vacuum cleaner can-
not be operated unless
the battery
29 is assem-
bled and charged.
• Insert the battery
29
into the battery com-
partment
7 until it en-
gages audibly.
• To remove the battery 29 from the bat-
tery compartment 7 , press in both un-
locking buttons 6 of the battery and pull
the battery out.
12
15
10
13
8
8 2
29 7
__338023_Handstaubsauger_B8.book Seite 31 Mittwoch, 15. Juli 2020 10:25 10