Silvercrest 293233, Operation And Safety Notes

Page: 23 / 81

23 GB/IE
Set-up Safety notes / Before use / Set-up
Discard any water remaining in the water res-
ervoir
2
after use to prevent the growth of
bacteria. To do so, allow the product to cool
down, remove the water tank
1
and tip the
product so water can drain out of the water
reservoir
2
.
Using the facial sauna
Connect the mains plug to the mains socket.
Set the rotary switch
5
to position . The
edge of the rotary switch will light up blue.
Steam will soon start coming out of the steam
chamber
7
.
Note:
When using this function for the first time,
first check the temperature of the steam with your
hand from a distance of about 25 cm from the
steam chamber
7
before aiming the steam at
your face. If you feel the steam is too hot, increase
the distance to approx. 45 cm.
Now aim the steam at your face. Choose a dis-
tance which provides a comfortable steam tem-
perature (see Fig. G). For example you can sit on
a bar stool and place the device on a chair, etc.
CAUTION! RISK OF BURNS DUE TO HOT
SURFACES!
Always keep a minimum distance
of 25 cm from the steam chamber
7
.
Note: Position your face so the steam hits your
chin first. This ensures the steam will cover your
entire face.
Note:
With the tank full, the “Facial Sauna“
function will last for approx. 15 minutes.
Set the rotary switch
5
to position to switch
the product off again.
Discard any water remaining in the water res-
ervoir
2
after use to prevent the growth of
bacteria. To do so, allow the product to cool
down, remove the water tank
1
and tip the
product so water can drain out of the water
reservoir
2
.
Using the infuser function
Fill the cup
4
with chopped fruits and / or
flowers. Or pour a few drops of essential oil
onto a cotton ball and add to the cup
4
.
Turn the steam chamber
7
counter-clockwise
until the arrow on the steam chamber
7
lines
up with the symbol on the housing
6
(see
Fig. B).
Remove the steam chamber
7
from the
housing
6
(see Fig. C).
Place the filled cup
4
in the housing
6
.
Push the steam chamber
7
back into the
housing
6
(see Fig. E).
Turn the steam chamber
7
clockwise until the
arrow on the steam chamber
7
lines up with
the symbol on the housing
6
(see Fig. F).
Connect the mains plug to the mains socket.
Set the rotary switch
5
to position .
The edge of the rotary switch will light up blue.
Infused steam will soon start coming out of the
steam chamber
7
.
Note:
When using this function for the first
time, first check the temperature of the steam
with your hand from a distance of about 25 cm
to the steam chamber
7
before aiming the
steam at your face.
Now aim the steam at your face. Choose a
distance which provides a comfortable steam
temperature (see Fig. G).
ATTENTION! RISK OF SCALDING!
Always
keep a minimum distance of 25 cm from the
steam chamber
7
.
Note: Position your face so the steam hits your
chin first. This ensures the steam will cover your
entire face.
Set the rotary switch
5
to position to switch
the product off again.
Discard any water remaining in the water res-
ervoir
2
after use to prevent the growth of
bacteria. To do so, allow the product to cool
down, remove the water tank
1
and tip the
product so water can drain out of the water
reservoir
2
.
Using the product as a humidifier
The product may also be used as a humidifier for
small rooms and for short periods.
Connect the mains plug to the mains socket.
Set the rotary switch
5
to position . The edge
of the rotary switch will light up blue. Steam will
293233_silv_Gesichtssauna_Content_OS.indd 23 21.11.17 10:02