Silvercrest 293233, Operation And Safety Notes

Page: 22 / 81

22 GB/IE
Set-up Safety notes / Before use / Set-up
Health Indications:
Excess use is harmful to the skin.
The product should initially only
be used once a day, no more
than two to three times per week.
Pay attention to how your skin
responds to the treatment and
adjust the frequency and dura-
tion of treatment accordingly.
If your skin becomes painful or
you feel unwell during use, stop
the treatment immediately and
seek medical attention.
Skin must be cared for appropri-
ately after every use. The treatment
will otherwise dry out the skin.
Before use
Note:
Remove all packaging material from the
product.
Setting up the product
Place the product on an even, level surface.
Filling the water tank
DANGER OF ELECTRIC
SHOCK!
Always unplug from the socket before filling
the water tank
1
.
Lift the water tank
1
up out of the water
reservoir
2
.
Unscrew the cover counter-clockwise from the
water tank
1
.
Fill the water tank
1
with purified, distilled or
tap water and screw the cover back onto the
water tank
1
.
If necessary, wipe the water tank
1
dry.
Reinsert the water tank
1
in the water
reservoir
2
.
Set-up
Warming towels
Unplug from the socket and make sure the
product has cooled down.
Turn the steam chamber
7
counter-clockwise
until the arrow on the steam chamber
7
lines
up with the symbol on the housing
6
(see
Fig. B).
Remove the steam chamber
7
from the
housing
6
(see Fig. C).
Fold a small, damp facial towel and place in
the housing
6
(see Fig. D).
Note: Only use 100 % cotton towels with a
maximum size of 30 x 30 cm.
Push the steam chamber
7
back into the
housing
6
(see Fig. E).
Turn the steam chamber
7
clockwise until the
arrow on the steam chamber
7
lines up with
the symbol on the housing
6
(see Fig. F).
Connect the mains plug to the mains socket.
Set the rotary switch
5
to position . The
edge of the rotary switch
5
will light up blue.
Wait for 2 minutes.
Set the rotary switch
5
to position and wait
for 2 minutes before opening the product to
prevent scalding from hot steam.
Turn the steam chamber
7
counter-clockwise
until the arrow on the steam chamber
7
lines
up with the symbol on the housing
6
(see
Fig. B).
Remove the steam chamber
7
from the
housing
6
(see Fig. C).
Remove the hot towel from the housing
6
with
tongs.
CAUTION! RISK OF BURNS DUE TO HOT
SURFACES!
The towel is very hot! Allow the
towel to cool to a comfortable temperature be-
fore applying to the facial skin.
293233_silv_Gesichtssauna_Content_OS.indd 22 21.11.17 10:02