48 GB
4. Items supplied
1 Contact grill with two grill plates
2 Grease drip trays
1 Set of operating instructions
5. How to use
DANGER! Risk of fire!
~
Place the device on a dry, level, non-slip
and heat-resistant surface.
~
The device must not be operated close
to flammable liquids or materials, or in
a potentially explosive environment.
Keep at a distance of at least 30 cm
from walls.
NOTE:
when in operation for the first time,
some smoke and odour may be generated
by the device. This is related to materials
used on the heating elements during assem-
bly, and is not a defect with the product. En-
sure adequate ventilation.
• Remove all packing material.
• Check to ensure that all parts are pres-
ent and undamaged.
•
Clean the device prior to its first
use!
(see “Cleaning” on page 50)
1. Open the lid
|
4
of the contact grill up-
wards. Be careful not to raise the lid
any further after it is vertical.
2. Before plugging in the device, check
that both thermostat controls
|
9
+
|
15
are set to the marking "•".
3. Insert the mains plug
|
6
into a wall sock-
et corresponding to the specifications of
the rating plate. The power indica-
tor
|
10
is illuminated as long as the de-
vice is connected to the power supply.
4. Rotate the thermostat controls
|
9
+
|
15
to
temperature setting 5. The device then
heats up the grill plates
|
13
, and the con-
trol lights
|
1
and
|
12
are illuminated.
5. Switch the device off after approx.
15 minutes by turning both thermostat
controls
|
9
+
|
15
to the marking "•".
6. Clean the appliance again. (see
“Cleaning” on page 50)
6. Operation
DANGER! Risk of injury
through burning!
~
The metal surfaces become very hot dur-
ing operation. Only touch the handles
and control elements of the device dur-
ing operation.
6.1 Heating up
1. Open the lid
|
4
of the contact grill up-
wards. Be careful not to raise the lid
any further after it is vertical.
2. Grease the grill plates
|
13
with vegeta-
ble oil or butter if appropriate.
3. Place a grease drip tray
|
16
under the
oil/fat runoff of the bottom grill plate
|
8
.
4. Close the lid
|
4
downwards in order to
close the contact grill.
5. Before plugging in the device, check
that both thermostat controls
|
9
+
|
15
are set to the marking "•".
6. Insert the mains plug
|
6
into a wall sock-
et corresponding to the specifications of
the rating plate.
7. Turn the thermostat controls
|
9
+
|
15
to
the desired temperature setting 1, 2, 3, 4
or 5.
- Setting 1: thaw
- Setting 2: warm
- Settings 3 and 4: moderate grill set-
tings
- Setting 5: highest grill setting
The device then heats up the grill
plates
|
13
, and the control lights
|
1
and
|
12
are illuminated.
BB&3(B%ERRN6HLWH0LWWZRFK0DL
Summary of Contents for 100156
