SILVER Audio Processor 4Bmini User’s manual
Page 32/38
Audemat-Aztec SA – Audemat-Aztec INC
web: www.audemat-aztec.com - e-mail: [email protected]
We could instead setup the dayparts as
DPO: F2:CHR - ALL 07:00 - 10:00
(factory preset 2 to run from 7AM everyday for 10 hours)
DP1: U4:NEW PRESET - ALL 10:00 - 02:00
(user preset 4 to run from 10am everyday for 2 hours)
which saves a daypart position.
By carefully selecting the default preset and overlaying dayparts we are able switch presets significantly more than
you first think you will be able to.
A/B COMPARISON FEATURE
The Remote application has two buttons labelled A and B that are located just below the connection button. These
buttons allow you to compare changes you have made to the processing against the saved preset. When you load a
preset the buttons should be greyed out but as soon as you make any processing changes these buttons will become
active. By selecting the B button you can temporarily revert back to the saved preset. During this time all the
processing controls will grey out to indicate you are in a compare mode. To return to the settings that you have been
adjusting click the A button and the processing controls will ‘un-grey’ If at any time you want to revert to the saved
preset and lose your adjustment just reload the preset from the preset selection window.
The A/B feature makes it easy to build up your own presets by being able to easily compare before and after
processing adjustments. We hope you find it useful.
