background image

 

Product Overview

The RocketPort PCI 

422

 series multiport serial card fits into the PCI slot of a 

personal computer, and uses a 36 MHz processor that is specifically designed to 
process asynchronous serial communications. The RocketPort PCI 

422

 supports 

RS-422 exclusively, in either DTE or DCE mode.

The RocketPort PCI 

422

 series uses Application Specific Integrated Circuits 

(ASICs) technology to replace most hardware components, including:

The processor

Serial controller

Bus interface logic and other miscellaneous logic

You can install up to four RocketPort PCI 

422

 cards in one PC, for a total of 32 

additional serial ports, and you can install a combination of PCI-bus and ISA-bus 
RocketPort cards.

Product List and 
Pictures

This 

Hardware Installation

 document discusses the following serial controllers.

422 Hardware Installation

Type

Ports

Interface Type

Quadcable

4

Includes a fanout cable with standard DB9 male connectors. 
Quadcables have the capability to be 8-port cards with an 8-
port interface cable. Some drivers view the 4-port as an 8-port 
card.

8

8

Requires one 8-port interface box.

Octacable

8

Includes a fanout cable with standard DB9 male connectors.

Note:

Interfaces are discussed and illustrated in 

RocketPort Interfaces

 on Page 4.

Summary of Contents for 422 Series










Reviews: