Silicon Graphics Zx10 User Manual Download

Page: 34 / 78

007-4330-002

2: Components

ATAPI Connectors

The system board has four 4-pin Advanced Technology Attachment Packet Interface
(ATAPI) connectors. The connectors are keyed for proper connection.

Table 2-2

ATAPI Connectors

ATAPI Connector

Function

CD IN

Connects to the audio cable from the system’s CD-ROM drive.

Pin 1=CD In Left, Pins 2 and 3=Ground, Pin 4=CD In Right

VIDEO IN

Connects to the audio cable from an internal device such as a TV tuner expansion
card.

Pin 1=Left Line In, Pins 2 and 3=Ground, Pin 4=Right Line In

MONO IN

Connects to the mono audio signal cable from a modem or other telephony device.

Pin 1=Audio Out, Pins 2 and 3=Ground, Pin 4=Audio In

MPEG IN

Connects to the cable carrying the decoded audio signal from a DVD player or
similar device.

Pin 1=Left Line In, Pins 2 and 3=Ground, Pin 4=Right Line In

Summary of Contents for Zx10















































































Search results

Summary of Contents for Zx10

Reviews:

Related manuals for Zx10

Brands by name

Popular brands

Silicon Graphics Zx10, User Manual

Search results

Summary of Contents for Zx10

Reviews:

Related manuals for Zx10

Brands by name

Popular brands