Silicon Graphics Zx10, User Manual

Page: 3 / 78

To reduce the risk of electrical shock and energy hazards, do not attempt to open the equipment unless instructed, and do not use a tool for
purposes other than instructed.
Internal components may be at high temperatures. Allow time for them to cool before handling them.
Internal components can be damaged by static electricity. Use an antistatic wrist strap connected to the bare metal of the system’s chassis to
protect against electrostatic discharge.
Notes
Changes or modifications made to the system that are not approved by the party responsible for compliance could void the user's authority to
operate the equipment.
Procedures in this document assume familiarity with the general terminology associated with personal computers, and with the safety practices
and regulatory compliance required for using and modifying electronic equipment.
Read all operating instructions before using this device. Keep these instructions for future reference. Follow all warnings on the device or in the
operating instructions.