Silicon Graphics Tezro, Hardware User'S Manual, Page: 71 / 174

Ordering Parts
007-4564-001 49
instructions since improper adjustment of other controls may result in damage
and will often require extensive work by a qualified technician to restore the
system to normal condition.
• If the system has been dropped or the cabinet has been damaged.
• If the system exhibits a distinct change in performance, indicating a need for
service.
11. Use only the proper type of power supply cord set (provided with the system) for
this unit.
12. Only qualified service personnel should replace the soldered lithium battery(s) in
the workstation. Please see “Lithium Battery Compliance Statement” on page 147
for more information.
Ordering Parts
Replacement parts are available directly from your local service provider. Contact the
SGI support office for more information.
Required Tools
All of the procedures in this chapter can be performed with the following tools:
• Wrist grounding strap
• T15 Torx driver
• Small flat-blade screwdriver
• Small phillips-blade screwdriver
Preparing the Workstation for Service
This section shows you how to open the workstation for service and protect the
components from static damage. The following topics are covered:
• “Powering Off and Disconnecting the Workstation” on page 50
• “Removing the Enclosure Panels” on page 51