manualshive.com logo in svg

Silicon Graphics InfiniteStorage 3500, User Manual, Page: 7 / 106

Share
Download
Silicon Graphics InfiniteStorage 3500 User Manual Download Page 7

Contents

007-5653-001

vii

4

Chassis Setup and Maintenance   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  25

Static-Sensitive Device  .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  26

Precautions  .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  26

Unpacking   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  26

Removing the Chassis Cover     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  26

Installing the Hard Drives    .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  27

Removing the Hard Drive Carriers from the Chassis   .     .     .     .     .     .     .     .     .     .     .     .     .  28

Installing a Hard Drive into the Hard Drive Carrier     .     .     .     .     .     .     .     .     .     .     .     .     .   29

DIMM Slot Population   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  31

DIMM Module Placement for Optimal Performance   .     .     .     .     .     .     .     .     .     .     .     .     .  31

DIMM Module Types and Optimal Configuration .     .     .     .     .     .     .     .     .     .     .     .     .     .  32

PCI Expansion Slots .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  34

Installing an Add-On or Expansion Card    .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .   35

Chassis Maintenance      .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  36

System Fans.     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  36

Replacing a System Fan     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .   37

Checking the System Air Flow .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  38

Power Supply     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  38

Replacing the Power Supply     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  39

5

System Monitoring .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  41

Overview      .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  41

Control Panel Buttons    .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  42

Control Panel LEDs .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  43

Power    .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  43

HDD      .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  43

NIC1      .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  44

NIC2      .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  44

Overheat/Fan Fail    .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  44

Power Fail   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  45

SATA Drive Carrier LEDs  .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  45

6

BIOS.     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  47

Starting BIOS Setup Utility .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .  47

Summary of Contents for InfiniteStorage 3500











































































































Reviews:

No comments