Silicon Graphics InfiniteStorage 3500, User Manual, Page: 40 / 106

20 007-5653-001
3: Installing the ISS3500 System in a Rack
Install the Server in a Rack
Warning:
The ISS3500 server weighs 80 lbs (36.3 kg) Always use proper lifting techniques
when your move the server. Always get the assistance of another qualified person when you
install the server in a location above your shoulders. Failure to do so may result in serious
personal injury or damage to the equipment.
You should now have rails attached to both the server chassis and the rack unit. The next step is
to install the server into the rack (refer to
Figure 3-5 ).
1. Extend the outer rails as shown in Figure 3-5 .
2. Align the inner rails of the chassis with the outer rails on the rack.
3. Keeping the pressure even on both sides, slide the inner rails into the outer rails.
When the chassis has been pushed completely into the rack, it should click into the locked
position.
4. Optional screws may be used to secure the to hold the front of the chassis to the rack.
Figure 3-5
Installing the Server in a Rack
!