83
Appendix C
C.
Setup Checklist
This appendix consists of a checklist for setting up the Fibre Channel Hub for desktop
use.
Table C-1
Hub Setup Checklist
Step
Explained In
1.
Check contents of shipment.
“Fibre Channel Hub Kit” on
page 2
2.
Determine how the hub is to be managed; determine nodes
to be cabled to the hub; determine a location for the hub.
Chapter 2
3.
Find MAC address on rear of hub:
Ethernet (MAC) address: ___-___-___-___-___-___
“Determining Hub
Management” on page 24
4.
From system administrator, obtain IP address, gateway,
and subnet.
IP address:_________________________
Gateway:__________________________
Subnet:__________________________
“Determining Hub
Management” on page 24
5.
Set up the Fibre Channel Hub and cable it.
Chapter 3
6.
Use console to set IP address.
“Setting Up Local
Communication With the
Hub” on page 37
7.
If necessary, change TCP/IP parameters.
“Changing TCP/IP Settings:
Command-Line Interface” on
page 44
8.
Set up communication with desired management method
(Internet browser or Telnet).
“Setting Up Remote
Communication for Hub
Management” on page 39
9.
Set other hub and communications parameters as required. Chapter 4
10.
Configure ports.
Chapter 5
