80
Appendix B: Command-Line Interface Summary
change server login password
Changes the default password (access) for remote
Telnet and rcf access.
change server privilege password
Changes the default administrator password (system).
change server subnet subnetmask
Defines the subnet mask, which must be entered in
decimal dot notation; for example, 255.0.0.0.
c
hange service http connections
[
enabled
|
disabled
]
Allows or prevents connection to the hub through an
Internet browser.
change service telnet connections
[
enabled
|
disabled
]
Allows or prevents connection to the hub through
Telnet.
define server authorize protocol tcp
[
enable
|
disable
]
Enables (default) or disables TCP on the hub manager;
disabling TCP allows only local communication for hub
management.
define server bootp
n m
[
temp
|
permanent
]
Sets number of times BootP attempts IP address
acquisition before attempting DHCP.
n
is the number of broadcast requests if IP address is not
known; range 0 (default) to 7, to prevent an IP address
being automatically assigned.
m
is the number of broadcast attempts if digital hub IP
address is known; default is 0.
temp
enters the response in volatile memory only,
forcing automatic IP address assignment every time the
hub is rebooted;
permanent
is the default.
define server dhcp
n m
[
temp
|
permanent
]
Sets number of times DHCP attempts IP address
acquisition before attempting RARP; options are the
same as for
define server bootp
define server rarp
n m
[
temp
]|
permanent
]
Sets number of times RARP attempts IP address
acquisition; options are the same as for
define server
bootp
.
define server name newname
Replaces default hub manager name; range is 1 to 47
alphanumeric characters. The default name is
DHMxxxxxx, where xxxxxx is the last six digits of the
MAC address without the dashes.
Table B-1 (continued)
Command-Line Interface
Command
Purpose
