Silicon Graphics Fibre Channel Hub, Owner'S Manual

Page: 80 / 108

64
Chapter 5: Fibre Channel Hub Operation and Management
• Counts:
– Error Count is the number of invalid transmission words received on this port.
– Bypass Count is the number of times the port was automatically bypassed.
– Elapsed Time is the time since the last port counter reset.
Clicking reset counters at the lower left restarts these counters at 0.
You can use this screen to change port configuration parameters by clicking Port Setup
at the lower left; the Port Setup screen for that port appears. Figure 5-7 on page 69 shows
an example.
Viewing Hub Statistics: Internet Browser Interface
To view information on the hub and the hub manager, click Properties in the menu bar.
Figure 5-3 shows an example screen.
Figure 5-3 Hub and Hub Manager Statistics