Changing TCP/IP Settings
45
To enable or disable TCP/IP on the hub manager, a user with administrator privilege
enters
Server>>define server authorize protocol tcp [
enable
|
disable
]
If you disable TCP, you can manage the hub only via local communication.
To change the hub’s IP address, a user with administrator privilege enters
Server>>change server ip
ipaddress
where
ipaddress
is the address assigned by the network administrator. Enter the IP
address in decimal dot notation, in this pattern:
xxx.xxx.xx.xx
For example:
123.234.22.22
To change the hub’s subnet mask for the hub, a user with administrator privilege enters
Server>>change server subnet
subnetmask
where
subnetmask
is a number between 0 and 255. Enter the subnet mask with periods, in
this pattern:
xxx.x.x.x
For example:
255.0.0.0
To define a gateway, a user with administrator privilege enters
Server>>change server gateway
gatewayipaddress
where gateway
ipaddress
is the address assigned by the network administrator, in decimal
dot notation (xxx.xxx.xx.xx).
The gateway node address must be identified before the hub can communicate across a
router. The gateway provides access to the router and the rest of the network segment.
