SILENTRON SERENYA 2000 Manual Download Page 11

Page: 11 / 20

COPYRIGHT SERENYA

COD. 2001

SERENYA

by Silentron

– made in Italy

M E S S A G E S





CONFIRM





V O C A L M E S S A G E S





CONFIRM





VOC1 ALARM





CONFIRM





VOCAL RECORDING1



TO RECORD



Talk close to the microphone. Press



for all the recording time. Verify

the remaining time (total 240

seconds)

VOCAL RECORDING1

240 . 239 . 238 . 237 . . . .

After recording automatic listening.

Press ESC to exit,



to listen again or

CANC to delete and restart

VOC1 ALARM





CONFIRM



VOC2 TAMPER





CONFIRM





RECORD THE MESSAGE

Record all messages from 1 to
7



VOC3= PANIC ; VOC4= ROBBERY ; VOC5= TECHNOLOGICAL ; VOC6= BATTERY ;
SMS MESSAGES: same procedure. From the VOCAL MESSAGES position move to SMS MESSAGES using the
buttons



4.6.1 WHAT TO RECORD - EXAMPLES

MSG 1: Attention intrusion alarm Mr. Rossi, via Bianchi 10 Turin (to the message it will be added automatically the detector that generated the
alarm whose "name" will be recorded thereafter , for example "contact window bathroom"): therefore the listened message will be:
"Attention intrusion alarm Mr. Rossi, via Bianchi 10 Turin, contact window bathroom",

MSG 2: Attention TAMPER alarm Mr. Rossi, via Bianchi 10 Torinos (as above)

MSG 3:  Attention  dangerous  situation  at  M.  Rossi's  house,  via Bianchi  10  Turin,  emergency  request  of  (to  the message  will  be  automatically
added the person's name that asked for help by key-fob), therefore the listened message will be:
"Attention dangerous situation at M. Rossi's house, via Bianchi 10 Turin, emergency request of - Giovanni"

MSG 4: Attention, robbery at M. Rossi's house via Bianchi 10 Turin, emergency request of (as above). This message, that can be activated via
key-fob without sirens activation, can be used in alternative for medical emergency request: evidently it is necessary to change the style of the
message and to associate it only to the number of the interested doctor.

MSG 5: Attention technical problem at M. Rossi's house via Bianchi 10 Turin (it will be added "fire detector, flooding" or other depending by the
association).

MSG 6: Attention, message from M. Rossi's house via Bianchi 10 Turin; change the battery (the name of the device will be added - it will be
"control panel" for the battery of the control panel)

4.6.2) VOCAL MESSAGE 7

If home a

utomations functions are not present it’s enaugh to record the control instructions.

- To check the control panel status (armed/disarmed) press 0 and



- To arm totally the control panel press 0





- To arm only partitions A+B press 0



2 #

- To disarm press 0 * 0 #

If some remote home automations functions are foreseen (lights activation, command of electric devices) it is necessary to record how to
execute the different commands according to the achieved activations: look 3.3.4

4.7) EXTRAS:

the additional system devices on the control unit are programmed using this menu.

- REMOTE CONTROLS (KEY-FOBS): portable transmitters for arming/disarming the control unit
- CODES (MAX 10):

groups of 5 numbers for arming/disarming the control unit using the keypad on board and/or other

- ZONE ALARM A (B,C):

group of anti-intruder detectors that are armed together - 3 groups available A,B,C

- 24H PANIC:

zone always active where the buttons (remote controls, keypads) are programmed to trigger manual
alarm

- 24H ROBBERY:

zone always active where the buttons (remote controls, keypads) are programmed for assistance calls.

- 24H TECHNOLOGICAL:

zone always active where the technical alarm sensors are programmed (smoke, water, gas etc.)