15
2. Also press the
STOP
button. The blind stops. The status display
lights brie
fl
y.
The intermediate position 2 is programmed.
Approaching intermediate position 1
Requirement
The transmitter/transmitter channel is programmed. The blind is at
its upper end position.
1. Press the
CLOSE
button twice brie
fl
y. The status display lights
brie
fl
y.
2. The blind travels to the stored intermediate position. If no
intermediate position is programmed, the blind drives to the
“closed” end position .
Approaching intermediate position 2
Requirement
The transmitter/transmitter channel is programmed. The blind is at
its lower end position.
1. Press the
OPEN
button twice brie
fl
y. The status display lights
brie
fl
y.
2.
The blind moves to the stored intermediate position 2. If no
intermediate position 2 has been programmed, the blind moves
to the "Open" end position.
Deleting the intermediate position 1 in the receiver
1. Press both the
STOP
and
CLOSE
buttons.
2. Hold down this button combination for approximately 3 seconds.
The status display lights brie
fl
y.
Deleting the intermediate position 2 in the receiver
1. Press both the
STOP
button and the
OPEN
button.
2. Hold down this button combination for approximately 3 seconds.
The status display lights brie
fl
y.
Explanation of functions
