14
Approaching "Closed" end position
Press the
CLOSE
button brie
fl
y. The blind closes completely.
Approaching "Open" end position
Press the
OPEN
button brie
fl
y. The blind opens.
Programming the intermediate position 1 in the receiver
Requirement
The transmitter/transmitter channel is programmed. The end
positions of the drive have been set. The blind is in the open end
position.
1. Move the blind to the required position using the
CLOSE
button.
In doing so, keep the
CLOSE
button pressed.
Option:
Press and hold the
STOP
and the
CLOSE
buttons
for 3 seconds to change to the slow travel mode “20 series
867/868/915”. The drive remains in the slow travel mode until
teaching in of intermediate position 1 is concluded.
2. Also press the
STOP
button. The blind stops. The status display
lights brie
fl
y.
The intermediate position1 is programmed.
Programming the intermediate position 2 in the receiver
Requirement
The transmitter/transmitter channel is programmed. The end
positions of the drive have been set. The blind is at its "closed" end
position.
1.
Move the blind to the required position using the OPEN button.
Keep the OPEN button pressed during the movement.
Option:
Press and hold the
STOP
and then also the
OPEN
buttons for 3 seconds to change to the slow travel mode “20
series 867/868/915”. The drive remains in the slow travel mode
until teaching in of intermediate position 2 is concluded.
Explanation of functions
