EH-1200F Installation Manual
Page 41
3.4
Quick Configuration Wizard
Use the Quick Configuration wizard to configure the basic system parameters. It holds
the basic minimal configuration required to start using the link.
The Quick Configuration wizard should be used for the initial system setup after
installation. For monitoring and advanced configuration, please refer to the dedicated
configuration pages of the Web-Based Management.
To access the Quick Configuration wizard, go to the
Quick Config
page.
3.4.1
Quick Configuration: Step 1
– System
Figure 3-5 Quick Config Page: Step 1 - System
The first section allows configuring the following parameters:
Name – you can give a name for each system
Date – [YYYY.MM.DD]
Time – [HH:MM:SS]
Click
Next
to continue.
3.4.2
Quick Configuration: Step 2
– Radio
Figure 3-6 Quick Config Page: Step 2 - Radio
This section allows configuring the following parameters:
Channel Bandwidth [MHz] – 250 or 500MHz (default is 500MHz).
