EH-1200F Installation Manual
Page 24
2.7
Installing the ODU with a Two Foot Antenna
This appendix presents the installation instructions of EtherHaul 1200 ODU with a two
foot antenna.
1.
Install the two foot antenna according to the mounting diagram on the next
page. Antenna mounting kit installation instructions are also available inside the
mounting kit package.
2.
Remove the protective tape on the antenna feed.
The two foot ODU is shipped with External ODU adapter attached.
Figure 2-3 EtherHaul ODU for 2ft Antenna
3.
Unpack the two foot ODU and remove the protective cap.
4.
Attach the ODU to the antenna and tighten the four locking bolts.
5.
Make sure you install the ODU with the required polarization (note the
polarization arrow on the back of the ODU).
Figure 2-4 EtherHaul ODU installed on 2ft Antenna
6.
Proceed with antenna alignment and ODU setup as described in
section 2.10
.
