EH-1200F Installation Manual
Page 26
2.8
Connecting the Cables
The following Figure shows the ODU interfaces. There are two or four active Ethernet
interfaces, depending on HW configuration.
EH-1200FX – two active Ethernet electrical interfaces (Eth1/Eth2).
EH1200F – four active Ethernet interfaces (Eth1/Eth2/Eth3/Eth4).
Ordering options:
2xElectrical (RJ45) + 2x optical (Fiber SFP)
1xElectrical (RJ45) + 3x optical (Fiber SFP)
1. Electrical Ground Outlet (GND)
6. Ethernet Cable RJ45 Interface
2. Power Connector Interface (PWR)
7. Fiber Cable SFP Interface (Eth4)
3. DVM Probe Interface (AUX)
8. System LEDs
4. Ethernet Cable RJ45 Interface
9, Reset Button (press for more than 8 seconds to restore factory
defaults)
5. Fiber Cable SFP Interface
Figure 2-5 EtherHaul Connection Panel Details
2.8.1
Power Options
Note:
EH-1200FX can be powered with DC only.
EH-1200F can be powered with DC or PoE.
To power up the EtherHaul using PoE, connect the cable to Eth#1.
