2.3.8
Pulse generation
•
Display the
TRANSMISSION CONFIGURATION
dialogue box.
•
Select the
Pulse
transmission function, then the
range using the function and navigation keys.
•
Select the "Type of Output"
Signal
.
•
Enter the amplitude of the signal between 0 and 20 V.
•
Confirm with ENTER.
The
icon appears in the Transmission window.
To change the default parameters, press ENTER or enter
the
Configuration …
menu then
Pulse …
.
The parameters are:
•
Width:
the duration of the HIGH logic state in seconds.
•
Period:
the duration of the HIGH logic state and the LOW log-
ic state in seconds.
•
Number:
the number of pulses to be generated, between 1 and
999,999.
To commence pulse generation, press
Start
.
During pulse generation, a progress bar indicates the state of progress.
The function keys can be used to control generation:
•
The
key stops generation at any time.
•
The key suspends generation.
•
The
key commences or resumes generation.
•
The icon in the transmission window indicates
suspended generation.
