18
(5) Push firmly the part indicated by the arrow in the figure below to close the paper cover to avoid one side
lock defect.
Top eject
Front eject
NOTE
◆
Pull the thermal paper straight.
◆
Push the paper cover firmly to close and avoid one side lock defect.
(6) After closing the paper cover, paper feed and paper cutting are performed automatically.
NOTE
◆
Be sure to operate the release lever to the end. When not, the paper cover may not
open.
◆
DO NOT cover the paper outlet or hold down the thermal paper ejected. Doing so
may cause paper jam.
◆
DO NOT touch the platen and gears in the printer. Doing so may cause loss of
printing quality or damage.
◆
Use the thermal paper whose core is 12mm inside diameter and 18mm outside
diameter. Moreover, DO NOT use the thermal paper with glued or taped end.
HINT
•
Leaving the printer with the thermal paper for a long time may cause a paper-feeding
problem because the surface of the thermal paper sticks to the thermal head due to the
environmental changes. In that case, open the paper cover to separate the thermal paper
from the thermal head, and then close the paper cover to use it.
