SIGRIST TurBiScat 2 Ex, Brief Instructions

Page: 23 / 176

Commissioning
SIGRIST-PHOTOMETER AG 23 / 176
Cable strands wh/gn gn wh/or or wh/bu bu wh/bn bn
Function 10/100BaseT TX+ TX- RX+ RX-
POE Mode A DC- DC+
POE Mode B DC+ DC-
4.3 Connection at a distance
With the standard cable (0.2 mm
2
) maximum distances of 100 m are possible. For longer distances, the cable
cross-section must be increased to such an extent that the cable resistance does not exceed 10 ohms.
5 Operation
The device can be operated via the proximity sensor (TOUCH) with the finger directly on the device display or with
WiFi-capable devices.
5.1 Operating elements
You can switch between the different menu items by touching them.
l
Short touch (<0.5s): navigate between menus
l
Touch for a long time (1...2s): Navigate within a menu
For the input to be recognized, the finger must be lifted at least 5 cm after the touch. Without activity, the display
changes to the measurement monitor after one minute.
6 Commissioning
u Ensure that the device is correctly mounted and connected.
u Connect the service voltage to the device.
ð The start-up display appears (factory setting language is English).
DE
EN
FR
ES
NL
PT
ZH
RU
CS
JA
IT
PL