Instruction Manual AquaScat S
Electrical installation
36
13798E/3
5.2.2
Overview of the Conn-R junction box
Figure 11: Conn-R junction box when open
Key for recalibration Section 9.6
This key is only active if no
SICON-C is connected.
Information LED D1
The flash code is described on the Sec-
tion 7.2
Pin headers J1 .. 4 fitted with
jumpers
To connect an AquaScat S,
jumpers must be fitted to the two
right-hand pins on the pin headers
J1.. J4.
Terminal strip for relay outputs
Terminal strip for connecting the
photometer, the power supply and
the customer connections
Section 5.2.4
Cable gland for cables measuring
4 to 8 mm
Cable gland for cables measuring
4 to 8 mm
Cable glands for cables measuring
8 to 13 mm
Instrument socket for connecting
the SICON-C