Electrical installation
Instruction Manual AquaScat S
13798E/3
35
5
Electrical installation
5.1
Safety pointers for electrical installation
DANGER!
Connecting the service voltage.
Improper connection of the service voltage can be potentially fatal. The system may also be
damaged. Local regulations for electrical connection must be observed at all times.
Further, the following basic principles must be observed:
Because the system has no main switch, a suitable disconnection device (switch, plug)
should be installed near the service voltage. It must be designated and easily accessible.
The system must not be charged with voltage until the installation is completed and all
covers are mounted.
If faults cannot be remedied, the system must be put out of operation and protected
against inadvertent operation.
5.2
Installing the Conn-R junction box
5.2.1
Opening the Conn-R junction box
WORKSTEP
ADDITIONAL INFO / IMAGES
1.
Open the flap on one side.
If the junction box should be opened
to the
right
, then open the left-hand flap.
If the junction box should be opened
to the
left
, then open the right-hand flap.
2.
Open the Conn-R junction box.