Mounting
Instruction Manual AquaScat S
13798E/3
25
4.2
Mounting the PE fitting
For mounting on the pipe, the PE100 screw-in fitting (pos. 3) must be welded onto the
pipe-T-piece (pos. 2) beforehand according to the
AquaScat_S_PE-MB
drawing.
Mounting of the PE fitting can be made according to the
AquaScat_S_PE-MB
dimensional
drawing.
Figure 6: Overview of a measuring point with connection via PE fitting
Absorber
Pipe-T-piece for connection to sample
line, provided by the customer
PE100 screw-in fitting
Union nut
Fastening plate
The marking on the rating plate shows
the position of the angled edge
(pos. 9).
M12 connector, female
AquaScat S
The angled edge of the sensor
head must be positioned against
the flow direction.
Flow direction of the sample