2.2 Blade Installation
Figure 2-12 is the illustrator of the blade holder. Insert a blade into the bottom of the blade holder and
remove the blade by pushing the pin. Make sure that your fingers are away from the blade tip.
Adjustment depth knob Pin
Outward ring
Step 1
Step 2
Install blade (Figure 2-13). Push the blade to the bottom of the blade
holder (Figure 2-14).
Step 3
Adjust the blade tip to suitable length by screwing “Blade tip adjustment screw” clockwise or count-
clockwise. (Figure 2-15).
Summary of Contents for Enduracut
Page 1: ......
