Signode TENSION-WELD VXL-2000-Z, Operation, Parts And Safety Manual

Page: 4 / 40

4
TABLE OF CONTENTS
General Safety Instructions 2
Specifications 4
Air Line Piping Installation 5
Operating Instructions 8
Adjustments 10
Parts Removal and Replacement 12
Air Logic and Diagram 20
Air Motor Identification 21
Parts List, Air Motors 22
Parts List, Tool 28
Troubleshooting 30
Maintenance 34
Tool Options 35
EU Declaration of Conformity 39
Maximum operating air pressure is 90
psig (6.2 bar).
Strap could possibly break at less than
90 psig (6.2 bar) depending on strap
size and type of package.
VXL-2000-Z VXM-2000-Z
Part No. 306540NT Part No. 306541NT
SPECIFICATIONS
MODEL
STRAP
TYPE WIDTH THICKNESS
VXL-2000-Z {302}, {304}, 306 Dymax
{502}, {504}, 506, 508 Dymax
{714}, {716}, 718 Contrax
{814}, {816}, 818 Contrax
{1716}, 1718 Tenax
{1816}, 1818, 1822 Tenax
7/16"(10.5mm)
1/2"(12.7mm)
7/16"(10.5mm)
1/2"(12.7mm)
7/16"(10.5mm)
1/2"(12.7mm)
0.017" to 0.029" (.43-.73mm)
0.015" to 0.030" (.38-.76mm)
0.019" to 0.030" (.48-.76mm)
0.017" to 0.026" (.43-.66mm)
0.021" to 0.024" (.53-.60mm)
0.017" to 0.028" (.43-.71mm)
VXM-2000-Z {304}, 306 Dymax
{504}, 506, 508 Dymax
{716}, 718 Contrax
{816}, 818 Contrax
{1716}, 1718 Tenax
{1816}, 1818, 1822 Tenax
7/16"(10.5mm)
1/2"(12.7mm)
7/16"(10.5mm)
1/2"(12.7mm)
7/16"(10.5mm)
1/2"(12.7mm)
0.023" to 0.029" (.58-.73mm)
0.020" to 0.030" (.50-.76mm)
0.025" to 0.030" (.63-.76mm)
0.022" to 0.026" (.55-.66mm)
0.021" to 0.024" (.53-.60mm)
0.017" to 0.028" (.43-.71mm)
NOTE: Strap sizes shown in brackets { } indicates strap sizes that (due to tension capabilities) may
require use of the VXL model only or the use of Tension Control Kit (Signode Part No. 422540
shown on page 33). Successful use of these strap sizes depends upon air pressure, tool condition
and package characteristics.