Signode TENSION-WELD VXL-2000-Z, Operation, Parts And Safety Manual

Page: 36 / 40

36
TOOL OPTIONS, Continued
9MM STRAP CONVERSION KIT, Part No. 306380
This strap conversion kit allows the VXL/VXM tool to use 9mm (1616) type strapping. Consult your
Signode Sales Representative about the benefits of this conversion for your tool application. Use
the instructions shown in this manual for replacing and adjusting parts.
The 9mm conversion kit consists of the following:
PART NO. QTY DESCRIPTION
306378 1 Strap Guide
306379 1 Feed Wheel
306381 1 Gripper plug
NOTE: Use of the tension control kit (P/N 422540 shown on page 33) is recommended for use
with this option.
VERTICAL AIR COUPLING, Part No. 422590
This options routes the pneumatic connection to the front of the tool
rather than the rear. This option is extremely useful for applications
which are close to the floor where the standard pneumatic connection
and supply hose could get in the way.
KEY QTY PART NO. DESCRIPTION
1 1 020710 Elbow, 90°
2 1 004154 Hose
3 1 086718 Coupling
4 3 036419 Elbow, 45°
5 1 422588 Mounting plate assy
6 1 036408 Reducer bushing
7 1 020704 Quick disconnect plug
8 4 009397 Socket head cap screw