manualshive.com logo in svg

SIGNIFY EA2204, Instruction Manual, Page: 25 / 44

Share
Download
SIGNIFY EA2204 Instruction Manual Download Page 25

AFTER SALES SUPPORT

  

  1300 777 137

  [email protected]

MODEL: EA2204    PRODUCT CODE: 708149    04/2022

25

Side PIR Sensor

The two side PIR sensor zones provide a wide detection angle and detect more 

potential triggers. Sometimes you may only wish to observe a certain point. Too many 

irrelevant triggers from the side sensor zones outside of this point continuously switch 

the Wildlife Camera on and off, considerably affecting battery life. In some situations, 

it may be difficult to remove interfering branches or avoid sun light. In these situations, 

you can switch off the side PIR sensors. The default setting for the side PIR sensors is 

‘On’. Refer to the steps below for how to turn the side PIR sensors ‘On’ and ‘Off’.

1.  Slide the power/mode switch to SETUP.
2.  Press the MENU button to access the menu options and settings.
3.  Use the 

SHOT

MODE

SHOT

MODE

 or 

SHOT

MODE

SHOT

MODE

 buttons to navigate the menu.

4.  Press the OK button to select ‘Side PIR’ from the menu.
5.  Use the 

SHOT

MODE

SHOT

MODE

 or 

SHOT

MODE

SHOT

MODE

 buttons to select ‘On’ or ‘Off’.

6.  Press the OK button to confirm your selection.
7.  Press the MENU button to exit the menu and return to the viewing screen.

PIR Sensitivity

The higher the sensitivity, the easier the motion sensor will be triggered. It is 

recommended to set the PIR sensitivity to ‘medium’ mode. The sensitivity of PIR 

is strongly related to the temperature. The higher the temperature, the lower the 

sensitivity of the PIR. The default setting for the PIR sensitivity is ‘High’. Refer to the 

steps below for how to change the PIR sensitivity.

1.  Slide the power/mode switch to SETUP.
2.  Press the MENU button to access the menu options and settings.
3.  Use the 

SHOT

MODE

SHOT

MODE

 or 

SHOT

MODE

SHOT

MODE

 buttons to navigate the menu.

4.  Press the OK button to select ‘PIR sensitivity’ from the menu.
5.  Use the 

SHOT

MODE

SHOT

MODE

 or 

SHOT

MODE

SHOT

MODE

 buttons to navigate the PIR sensitivity options: ‘high’, ‘medium’, 

‘low’ or ‘auto’.

6.  Press the OK button to confirm your selection.
7.  Press the MENU button to exit the menu and return to the viewing screen.

INSTRUCTIONS (CONT.)

Summary of Contents for EA2204













































Reviews:

No comments