Increase button
K2: Press the key once, the LED display will flash indicating
the current temperature.
Press again to adjust the temperature. One pressure will
increase the temperature by 1 degree. Blinking stops after
5 seconds without action on your part, and the new
temperature requested is saved. The LED display then
indicates the actual temperature inside.
Temperature display
L1: The temperature can be adjusted from 5 to 20 degree
according to the cycle below (one pressure = 1 degree
additional)
Reduction button
K3: Press the key once, the LED display will flash indicating
the current temperature. Press again to adjust the
temperature. One pressure will reduce the temperature
by 1 degree. The blink stops after 5 seconds without action
on your part, and the new temperature programmed is
saved. The LED display indicates then the actual
temperature inside.
Fahrenheit / Celsius mode
K4: Switch the temperature display between Fahrenheit /
Celsius by pressing the key.
-47-
