background image

10

BEFORE USING YOUR WINE CELLAR

The appliance you have purchased is a wine cellar
(or wine-cooler), a professional product designed
exclusively for storing wine.

To get the most out of your new appliance,
read the user instructions thoroughly. They
describe the appliance in full and provide
useful wine storage tips.

Keep this handbook for future consultation.

1. After unpacking the appliance, make sure that

the door shuts properly.
Any damage must be reported to your dealer
within 24 hours after delivery of the appliance.

2. Wait at least two hours before connecting the

appliance to the power supply in order to
ensure the refrigerant circuit is fully efficient.

3. Installation of the appliance and electrical

connections must be carried out by a qualified
electrician, in accordance with the
manufacturer's instructions and local regulations.

1. Imballo 
The packing material is 100% recyclable and bears
the recycling symbol. For disposal, comply with the
local regulations. Keep the packing materials
(plastic bags, polystyrene parts, etc.) out of the
reach of children, as they are a potential source of
danger.
2. Scrapping/Disposal
The appliance is manufactured using recyclable
material.
This appliance is marked in compliance with
European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE). By
ensuring the correct disposal of this appliance, you
can help prevent potentially negative consequences
for the environment and the health of persons.

The symbol 

on the appliance, or on the

accompanying documents, indicates that this
appliance should not be treated as domestic waste
but must be taken to a special collection centre for
the recycling of electrical and electronic
equipment.
When scrapping the appliance, make it unusable by
cutting off the power cable and removing the
doors and shelves so that children cannot easily
climb inside and become trapped.
Scrap the appliance in compliance with local
regulations on waste disposal, taking it to a special
collection centre; do not leave the appliance
unattended even for a few days, since it is a
potential source of danger for children.
For further information on the treatment, recovery
and recycling of this product, contact your
competent local office, the household waste
collection service or the shop where you
purchased the appliance.

Information:
This appliance does not contain CFCs. The
refrigerant circuit contains R134a (HFC) or R600a
(HC) (see the rating plate inside the appliance).
Appliances with Isobutane (R600a): isobutane is a
natural gas without environmental impact, but is
flammable. Therefore, make sure the refrigerant
circuit pipes are not damaged.
This product may contain Fluorinated Greenhouse
Gases covered by the Kyoto Protocol; the
refrigerant gas is inside a hermetically sealed
system.
Refrigerant gas: R134a has a Global Warming
Potential of (GWP) 1300.

Declaration of conformity 
• This appliance has been designed for preserving

food and is manufactured in compliance with
Regulation (CE) No. 1935/2004.

• This appliance has been designed, manufactured

and marketed in compliance with:
- safety objectives of the “Low Voltage"
Directive 2006/95/CE (which replaces
73/23/CEE and subsequent amendments);
- the protection requirements of Directive
“EMC" 2004/108/EC.

Electrical safety of the
appliance can only be
guaranteed if it is correctly
connected to an approved
earthing system.

SAFEGUARDING THE ENVIRONMENT

501931102010GB:Layout 1  16-04-2009  13:52  Pagina 10

Summary of Contents for WW1640 X








Reviews: