![Signature Kitchen Suite SKSCF1801P Owner'S Manual Download Page 34](http://html.mh-extra.com/html/signature-kitchen-suite/skscf1801p/skscf1801p_owners-manual_1268992034.webp)
34
TROUBLESHOOTING
Ice & Water
Problem
Possible Cause
Solutions
Icemaker is not
making ice
The ice detecting sensor is
obstructed.
Foreign substances or frost on the ice-detecting sensor
can interrupt ice production. Make sure that the sensor
area is clean at all times for proper operation.
The freezer is not connected
to a water supply or the supply
shutoff valve is not turned on.
Connect the freezer to the water supply and turn the
water shutoff valve fully open.
Icemaker shutoff (arm or
sensor) obstructed.
If your icemaker is equipped with an ice shutoff arm,
make sure that the arm moves freely. If your icemaker
is equipped with the electronic ice shutoff sensor, make
sure that there is a clear path between the two sensors.
Reverse osmosis water
filtration system is connected
to your cold water supply.
Reverse osmosis filtration systems can reduce the
water pressure below the minimum amount and result
in icemaker issues. (Refer to the Connecting the Water
Line section.)
Ice has bad taste or
odor.
Water supply contains
minerals such as sulfur.
A water filter may need to be installed to eliminate taste
and odor problems. NOTE: In some cases, a filter may
not help. It may not be possible to remove all minerals/
odor/taste in all water supplies.
Icemaker was recently
installed.
Ice that has been stored for too long will shrink, become
cloudy, and may develop a stale taste. Throw away old
ice and make a new supply.
The food has not been stored
properly in the compartment.
Rewrap the food. Odors may migrate to the ice if food is
not wrapped properly.
The interior of the freezer
needs to be cleaned.
See the Maintenance section for more information.
The ice storage bin needs to
be cleaned.
Empty and wash the bin (discard old cubes). Make sure
that the bin is completely dry before reinstalling it.
Icemaker is making
too much ice.
Icemaker shutoff (arm/ sensor)
is obstructed.
Empty the ice bin. If your icemaker is equipped with an
ice shutoff arm, make sure that the arm moves freely. If
your icemaker is equipped with the electronic ice shutoff
sensor, make sure that there is a clear path between the
two sensors. Reinstall the ice bin and wait 24 hours to
confirm proper operation.
Summary of Contents for SKSCF1801P
Page 42: ...42 Memo MEMO ...
Page 84: ...42 AIDE MÉMOIRE AIDE MÉMOIRE ...
Page 126: ...42 MEMORÁNDUM MEMORÁNDUM ...
Page 127: ...43 MEMORÁNDUM MEMORÁNDUM ...