- 4 -
1 Open-package check and cable connections
1.1 Open-package check
When you receive the NVR, please check first.
First, please check whether there is any visible damage to the package appearance. The protective
materials used for the package of the NVR can protect most accidental clashes during transportation.
Then, please open the box and get rid off the plastic protective materials. Check whether there is
any visible damage to the NVR appearance.
At last, please open the machine crust and check the data wire in the front panel, power wire, the
connection between the fan power and the main board.
1.1.1Front panel and rear panel
♦
The key function specification in the front panel and the interface specification in the real panel
are in the specification.
♦
Please check the product type in the front panel whether is accordant with the product type you
order.
The label in the real panel is very important for the after service. Please protect it carefully. When
you contact us for after service, please provide the product type and serial number in the label.
1.1.2.Check
After open the cover,you should check if it has obvious damage trace,also please check the front
panel data cable,power cord and motherboard's connection are loose or not.
1.2 Front panel
The front panel of T series
1
）
STANDBY: Press to power the system standby.
2
）
IR Sensor: IR receiver for the remote control.
3
）
LED Indicators: Shows status of alarm, rec, power.
4
）
Channel/Numbers/Playback: Press buttons
0~9
to view the selected channel in full-screen;
