- 15 -
3
、
、
、
、
Scan
PTZ also can work on the preset scan line repeatedly.
。
1
）
Scan setup
Setting steps:
Step1: In Picture 2.5.5.0, click Setup button
，
enter Picture 2.5.5.4
；
Step2: Click Scan button
，
the input proper value in the scan value blank;
Step3:Click Start button, enter Picture2.5.5.0,here you can set the following items:
Zoom,Focus,Aperture,Direction and so on. Click Setup button to go back Picture 2.5.5.4
Step4: Click End button to complete setup.Click the right button of the mouse to exit.
Pic 2.5.5.4 Scan Setup
2
）
Scan Calls
In Picture2.5.5.0, click Page Switch button, then enter PTZ control menu as shown in Picture
2.5.5.2. Please input the number of scan in the value blank , then click Scan button
，
PTZ begins to work
on the scan line . Click Stop button to stop.
4
、
、
、
、
Boundary Scan
In a horizontal line
，
set up a line
，
call scan
，
PZT repeat operation according to the route
1
）
Boundary Scan setup
Set a period of horizontal curve for PTZ search path,the steps are as follows:
Step1
：
In Picture 2.5.5.0, click Direction button to turn the PTZ to preset direction, then click
Setup button enter Picture 2.5.5.5, select the left boundary, return to Picture 2.5.5.0;
Step2
：
Please click direction arrows to adjust PTZ direction, click Setup button enter
Picture2.5.5.5, then select the right boundary ,return to Picture2.5.5.0;
Step3: Complete setup, that is the position of left and right boundary
Note:when the left and right scan in one horizontal,the PTZ will cycle rotate from left scan along the
Scan value blank
Scan Button
