- 23 -
Pic 3.2.1.2 PTZ linkage
【
Delay
】
When alarm is over,recording will last some seconds(10~300sec),then stop.
【
Show message
】
Pop the alarm information dialog box in the local host computer screen.
【
Send EMAIL
】
■
means sending an email to user when the alarm is turned on.
Note:Set in the [NetService] and send email.
【
FTP upload
】
to tick it, the video & picture of related record channel & snapshot channel will be
uploaded to assigned position.
Note
：
FTP upload need be set at [Netservice]
【
Buzz
】
When alarm happens, device will come out with buzz.
3.2.2 Video Blind
When the video image is influenced by the environment such as bad brightness or reaching the set
sensitivity parameter, the video blind function is turned on and the linkage function is turned on.
Note:Both of the NVR and the connected device need to enable video blind function ,then it can
works.
"Advanced" button is the same as right click.
Pic 3.2.2 video blind
Set method: refer to chapter 3.3.1. Motion detect.
3.2.3 Video Loss
When the equipment can not obtain the channel video signal, the video loss alarm is turned on and
the linkage function is turned on.
Note:Both the NVR and the connected device need to enable this function ,then it can works.
"Advanced" button is the same as right click.
